P0315 - Crankshaft Position System Variation Not Learned
P0315 - CRANKSHAFT POSITION SYSTEM VARIATION NOT LEARNED
| Description: | The PCM has not learned the crankshaft pulse wheel tooth spacing. This DTC disables the misfire monitor. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Complete the Misfire Monitor Neutral Profile Correction procedure using the scan tool. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | Refer to the Description, Possible Causes and Diagnostic Aids for the DTC. | ||