P0303 - Cylinder 3 Misfire Detected
P0303 - CYLINDER 3 MISFIRE DETECTED
| Description: | This DTC sets when the misfire detection monitor detects an engine misfire in cylinder 3. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Misfire is defined as lack of combustion in a cylinder due to absence of spark, incorrect fuel metering, low compression, or any other cause. The malfunction indicator lamp (MIL) blinks once per second when a misfire severe enough to cause catalyst damage is detected. If the MIL is on steady state due to a misfire, this indicates the threshold for emissions was exceeded and caused the vehicle to fail an inspection and maintenance tailpipe test. |
||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test HD . | ||