P0232 - Fuel Pump Secondary Circuit High

P0232 - FUEL PUMP SECONDARY CIRCUIT HIGH

Description:	This DTC sets when the PCM detects voltage on the FPM circuit while the fuel pump (FP) is commanded OFF. The FPM circuit is wired to a pull-up voltage inside the PCM. The FPM circuit goes high if, with the ignition ON, engine OFF and the FP commanded OFF, the FPM/FPPWR circuit loses its path to ground through the FP. The FPM circuit also goes high if the FPM/FPPWR circuit is short to voltage.
Possible Causes:	Open circuit between the FP and the FPM connection to the FPPWR circuit FP ground intermittently open FP electrically open FP secondary circuits short to voltage FP relay contacts always closed
Diagnostic Aids:
Application	Key On Engine Off	Key On Engine Running	Continuous Memory
All	GO to Pinpoint Test KC .