P0175 - System Too Rich Bank 2

P0175 - SYSTEM TOO RICH BANK 2

Description:	The adaptive fuel strategy continuously monitors the fuel delivery hardware. This DTC sets when the adaptive fuel tables reach a lean calibrated limit. Refer to POWERTRAIN CONTROL SOFTWARE , Fuel Trim for additional information.
Possible Causes:	Leaking fuel injectors Fuel return line restricted Fuel rail pressure (FRP) sensor bias EVAP purge valve is leaking when the canister is full Contaminated mass airflow (MAF) sensor (if equipped) Damaged MAF sensor (if equipped) Oil contaminated with fuel
Diagnostic Aids:	View the freeze frame data to determine the operating conditions when the DTC was set. Observe the LONGFT1 and LONGFT2 PIDs. Refer to ADAPTIVE FUEL DIAGNOSTIC TROUBLE CODE (DTC) DIAGNOSTIC TECHNIQUES , for additional information and the appropriate pinpoint test for specific concern identification.
Application	Key On Engine Off	Key On Engine Running	Continuous Memory
All	GO to Pinpoint Test H .