P0050 - Ho2S Heater Control Circuit (Bank 2 Sensor 1)
P0050 - HO2S HEATER CONTROL CIRCUIT (BANK 2 SENSOR 1)
| Description: | The PCM controls the universal heated oxygen sensor bank 2, sensor 1 (HO2S21) heater ON and OFF duty cycle to maintain a calibrated temperature. This DTC sets when the sensor does not warm up to the required temperature in a calibrated amount of time. This DTC also sets when the PCM is not able to maintain the required temperature after the sensor is warm. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Inspect the connectors for signs of damage, water intrusion or corrosion. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test DZ . | ||