P0023 - B Camshaft Position Actuator A Control Circuit/Open Bank 2

P0023 - B CAMSHAFT POSITION ACTUATOR A CONTROL CIRCUIT/OPEN BANK 2

Description:	This DTC sets when a low or high voltage on the VCT22 circuit is detected. This DTC sets if the voltage exceeds a calibrated limit for a calibrated amount of time.
Possible Causes:	VCT22 circuit open VCT22 circuit short to voltage VCT22 circuit short to ground VPWR circuit open Damaged variable camshaft timing bank 2 solenoid 2 (VCT22)
Diagnostic Aids:
Application	Key On Engine Off	Key On Engine Running	Continuous Memory
All	GO to Pinpoint Test HK .