LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2017 >> Transit Connect XL, Van Cargo >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Controls - Pinpoint Test JF: Integrated Ignition Coil On Plug Coils A-J Failure Through Pinpoint Test Z: Intermittent - (Except Diesel & Hybrid) >> Pinpoint Test QC: On Board Diagnostic (OBD) Systems Readiness >> Introduction

Pinpoint Test QC: On Board Diagnostic (OBD) Systems Readiness: Introduction

NOTE: The vehicle may not have completed an OBD drive cycle. This is indicated by the inspection maintenance (I/M) readiness status not complete. In some areas, the OBD drive cycle must be completed to pass an I/M test. Refer to ON BOARD DIAGNOSTIC (OBD) DRIVE CYCLE .