LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2017 >> Transit Connect XL, Van Cargo >> Repair and Diagnosis >> Electrical >> Gauges >> Information Center - Instrumentation, Message Center And Warning Chimes >> Description And Operation >> Warning Chimes - System Operation and Component Description >> System Operation >> Network Message Chart

Network Message Chart

Module Network Input Messages - Instrument Panel Cluster (IPC) 

Broadcast Message Originating Module Message Purpose
Alarm/key programming chime request BCM Input used for the keyless key programming chime.
Alarm mode BCM Input used for the perimeter alarm chime.
Hill start assist chime ABS module Input used for the hill start assist chime.
Ignition status BCM Ignition RUN, START and accessory states required for the IPC operating modes and fault reporting.
Parking brake warning request BCM Input used for the parking brake warning chime.
Parking aid active PAM Input used for the parking aid chime.
Passenger detect status OCSM Input used for the Belt-Minder ® chime.
Position light indication BCM Input used for the headlamps on chime.
Power mode BCM Input used for the key-in-ignition warning chime.
Safety belt buckle status RCM Input used for the safety belt component of the Belt-Minder ® chime.
Turn indicator command BCM Input used for the turn signals on chime tone (tick-tock).
Vehicle speed ABS module Input used for the vehicle speed component of the Belt-Minder ® chime and the door ajar chime.
scientia non olet · About LEMON Manuals