Pinpoint Test C : B1305:13: Notes
Normal Operations and Fault Conditions
REFER to: Perimeter Anti-Theft Alarm - System Operation and Component Description .
BCM DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B1305:13 | Hood Switch: Circuit Open | An on-demand DTC that sets when the BCM detects an open from the hood ajar input circuit. This DTC sets if the hood is open during the BCM self-test. |
Possible Causes
- Wiring, terminals or connectors
- Hood latch
- BCM
Visual Inspection and Diagnostic Pre-checks
- Inspect the hood latch for damage.