Arming The Perimeter Alarm

The perimeter alarm is ready to arm any time the ignition is off. The perimeter alarm pre-arms when:

• pressing the lock button on a RKE transmitter.
• pressing a door lock control switch to the lock position with the door open, and then closing the door.

Once the system is pre-armed, there is an 11-second countdown before the perimeter alarm is armed. Each entry point to the vehicle (hood, doors, and liftgate) is armed separately and must be closed before that entry point begins the 11-second countdown to become armed. If all entry points are closed, the turn signals flash indicating all entry points are entering the 11-second countdown.