Hood Latch Release Cable: Installation
- Install the hood latch release cable.
- Install the hood latch release cable through the cowl.
- Attach the cable routing clip.
- Route the hood latch release cable and seat the grommet in the cowl.
- Position and connect the hood latch release cable to the routing bracket.
- Attach the hood latch release cable to the hood latch.
- Attach the cable end to the hood latch.
- Attach the hood latch release cable to the retaining bracket.
- Attach the hood latch release cable into the routing clips.
- Install the hood latch release.
- Install the hood latch release and the bolts.
- Connect the hood latch release cable to the hood latch release.
- Position the hood latch cable as shown.
- Attach the hood latch release cable to the hood latch release retaining bracket.
- Position the carpet.
- Install the LH kick panel and the retainers.
- Install the hood latch release handle.
- Install the hood latch release handle.
- Install the hood latch release handle retaining clip.
- Install the hood latch release handle retaining clip.
- Install the front door scuff plate and position the front door weatherstrip.
- Position the front door weatherstrip.
- Install the front door scuff plate retaining clips and install the front door scuff plate.
- Install the battery tray. Refer to: Battery Tray - 2.5L Duratec (125kW/170PS) .