Pinpoint Test H : B1B36:14, B1B38:14, B1B40:14, B1B42:14: Notes
Refer to Parking Aid for schematic and connector information.
Normal Operation and Fault Conditions
The PAM supplies voltage and ground to the rear parking aid sensors and monitors the sensor signal return circuits when the ignition is on.
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B1B36:14 | Right Front Outer Sensor: Circuit Short To Ground Or Open | A continuous and on-demand DTC that sets when any of the right front outer parking aid sensor circuits are open or the sensor signal line is shorted to ground. |
| B1B38:14 | Right Front Inner Sensor: Circuit Short To Ground Or Open | A continuous and on-demand DTC that sets when any of the right front inner parking aid sensor circuits are open or the sensor signal line is shorted to ground. |
| B1B40:14 | Left Front Outer Sensor: Circuit Short To Ground Or Open | A continuous and on-demand DTC that sets when any of the left front outer parking aid sensor circuits are open or the sensor signal line is shorted to ground. |
| B1B42:14 | Left Front Inner Sensor: Circuit Short To Ground Or Open | A continuous and on-demand DTC that sets when any of the left front inner parking aid sensor circuits are open or the sensor signal line is shorted to ground. |
Possible Sources
- Wiring, terminals or connectors
- Front parking aid sensor
- PAM
NOTE:
Before disconnecting the PAM or any of the parking aid sensors, verify the connectors are properly seated and latched.