LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2017 >> Fusion Titanium, AWD >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine Controls - Fuel Charging And Controls - Turbocharger - 2.0L ECOBOOST (184KW/250PS) - Mi4 >> Removal And Installation >> Wastegate Control Valve Solenoid >> Installation

Wastegate Control Valve Solenoid: Installation

  1. Install the wastegate control valve solenoid, then install and tighten the wastegate control valve solenoid retainers.

    Torque: 53 lb.in (6 Nm)

    GFD193539Courtesy of FORD MOTOR COMPANY
  2. Connect the wastegate control valve solenoid hoses and the wastegate control valve solenoid electrical connector. Use the General Equipment: Hose Clamp Remover/Installer
GFD193538Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals