Brake Vacuum Pump - 2.7L EcoBoost (238kW 324PS): Removal

NOTE: Removal steps in this procedure may contain installation details.

1. Remove the CAC intake pipe. Refer to: Charge Air Cooler (CAC) Intake Pipe .
2. Disconnect the vacuum tubes.

   Courtesy of FORD MOTOR COMPANY

3. Detach the wiring retainer.

   Courtesy of FORD MOTOR COMPANY

4. Remove the bolts and the vacuum pump.

   Torque: 89 lb.in (10 Nm)

Courtesy of FORD MOTOR COMPANY