LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2017 >> Fusion Titanium, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel And Console (Except Hybrid) >> Removal And Installation >> Overhead Console >> Removal

Overhead Console: Removal

NOTE: Removal steps in this procedure may contain installation details.
NOTE: Consoles look different depending on option level.
    1. Insert trim tool in location(s) shown below.
    2. Rotate the tool 90 degrees to release the overhead console rear retainers.
    GFD196527Courtesy of FORD MOTOR COMPANY
  2. Working from the rear to the front along each side release the overhead console retainers.
    GFD196528Courtesy of FORD MOTOR COMPANY
  3. Rotate to release the clips and remove the overhead console.
    GFD196529Courtesy of FORD MOTOR COMPANY
  4. Disconnect the electrical connectors.
GFD196530Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals