Front Door Alignment

Adjustment

NOTE: Removal steps in this procedure may contain installation details.

NOTE: LH shown, RH similar.

All alignments

Check the body to front door dimensions. Refer to: Body and Frame .
Remove the bolts and the striker assembly.

Courtesy of FORD MOTOR COMPANY

Front door in and out, up and down alignment
Loosen the bolts to permit movement of the door.
Torque: 35 lb.ft (48 Nm)

Courtesy of FORD MOTOR COMPANY
Adjust the door to specification. Refer to: Body and Frame .

Courtesy of FORD MOTOR COMPANY

Front door fore, aft and tilt alignment
Remove the fender splash shield. Refer to: Fender Splash Shield .
Loosen the bolts to permit movement of the door.
Torque: 22 lb.ft (30 Nm)

Courtesy of FORD MOTOR COMPANY
Loosen the bolts to permit movement of the door.
Torque: 22 lb.ft (30 Nm)

Courtesy of FORD MOTOR COMPANY
Adjust the door to specification. Refer to: Body and Frame .

Courtesy of FORD MOTOR COMPANY

All alignments
Tighten the bolts.
Torque: 18 lb.ft (25 Nm)

Courtesy of FORD MOTOR COMPANY
Check the body to front door dimensions. Refer to: Body and Frame .
Install any removed components as needed.