LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2017 >> Fusion Titanium Hybrid >> Repair and Diagnosis >> Accessories & Equipment >> Steering Column Switches >> Steering Wheel And Column Electrical Components (Hybrid/ENERGI) >> Removal And Installation >> Ignition Lock Cylinder Housing >> Removal

Ignition Lock Cylinder Housing: Removal

  1. WARNING: Before beginning any service procedure in this article, refer to Health and Safety Precautions . Failure to follow this instruction may result in serious personal injury.
  2. Remove the SCCM. Refer to: Steering Column Control Module (SCCM) .
  3. Remove the RH side bolt.
    GFD197499Courtesy of FORD MOTOR COMPANY
  4. Disconnect the electrical connector and remove the LH side bolt.
GFD197500Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals