LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2017 >> Fusion Energi Platinum >> Repair and Diagnosis >> Electrical >> Gauges >> Information Center - Instrumentation, Message Center And Warning Chimes (Hybrid/ENERGI) >> Diagnosis And Testing >> Instrumentation, Message Center and Warning Chimes - 2.0L Duratec - Hybrid (96kW/130PS) >> Pinpoint Tests >> Pinpoint Test F : The Odometer Is Inoperative >> Pinpoint Test F : The Odometer Is Inoperative

Pinpoint Test F : The Odometer Is Inoperative

  1. F1 CHECK FOR CORRUPTED NON-VOLATILE MEMORY (NVM)

    • Ignition ON.

    • Observe the message center display area.

    Does the odometer display ERROR? 

    Yes  Refer to: IPC Hardware Testing .
    No  GO to  F2
  2. F2 PERFORM THE IPC (INSTRUMENT PANEL CLUSTER) SELF-TEST

    • Using a diagnostic scan tool, perform the IPC self-test.

    Are any Diagnostic Trouble Codes (DTCs) recorded? 

    Yes  REFER to DTC Chart: IPC .
    No  GO to  F3
  3. F3 CHECK THE GWM (GATEWAY MODULE A) DIAGNOSTIC TROUBLE CODES (DTCS)

    • Using a diagnostic scan tool, check the GWM Continuous Memory Diagnostic Trouble Codes (DTCs).

    Are any Diagnostic Trouble Codes (DTCs) recorded? 

    Yes  REFER to: Module Communications Network (Hybrid/Energi) .
    No  DIAGNOSE all PCM Diagnostic Trouble Codes (DTCs). Refer to Engine Controls - Powertrain DTC Charts & Descriptions (Hybrid) .