Ignition Switch - Vehicles With: Push Button Start: Removal

1. Vehicles with touchscreen display.Remove the FCIM. Refer to: Information And Entertainment System - General Information - Vehicles With: Sync (Hybrid/Energi) . Refer to: Information And Entertainment System - General Information - Vehicles With: Sony Audio System (Hybrid/Energi) .
2. Vehicles with touchscreen display.Remove the retainers, disconnect the electrical connector and remove the FCIM.

   Courtesy of FORD MOTOR COMPANY

3. Vehicles without touchscreen display.Remove the FCDIM. Refer to: Front Control/Display Interface Module (FCDIM) .
4. Remove the push button ignition switch.
   1. Release the tabs. Use the General Equipment: Interior Trim Remover
   2. Disconnect the electrical connector and remove the ignition switch.

Courtesy of FORD MOTOR COMPANY