Pinpoint Test Y : DTC: U0212:00: Notes
Refer to: Module Communications Network for schematic and connector information.
Normal Operation and Fault Conditions
The DSM and the SCCM communicate using the CAN.
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U0212:00 | Lost Communication with Steering Column Control Module: No Sub Type Information | Set by the DSM whenever it has lost communication to the BCM for 5 seconds or longer while DSM input voltage is between 10 and 15.5 volts. |
Possible Causes
- Module communication
- DSM
- SCCM