Module Communications Network (Hybrid/ENERGI)
- Description And Operation
- Communications Network - Overview
- Communications Network - 2.0L Duratec - Hybrid (96kW/130PS) - System Operation and Component Description
- System Operation
- System Diagram
- Network Message Chart
- Network Termination
- Gateway Module
- High Speed Controller Area Network 1 and 2 (HS1-CAN, HS2-CAN)
- High Speed Controller Area Network 3 (HS3-CAN)
- Medium Speed Controller Area Network (MS-CAN)
- Controller Area Network (CAN) Fault Tolerance
- Controller Area Network (CAN) Multiplex Messages - HEV and PHEV
- System Operation
- Diagnosis And Testing
- Communications Network - 2.0L Duratec - Hybrid (96kW/130PS)
- DTC Chart: Gateway Module (GWM)
- Symptom Chart: Communication Network
- Pinpoint Tests
- Pinpoint Test A : The Powertrain Control Module (Pcm) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test B : The Secondary On-Board Diagnostic Control Module C (SOBDMC)/Transmission Control Module (TCM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test C : The Anti-Lock Brake System (Abs) Module Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test D : The Restraints Control Module (RCM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test E : The Occupant Classification System (OCS) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test F : The BECMB (Extended Power Module) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test G : The SCCM (Steering Column Control Module) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test H : The Instrument Panel Cluster (IPC) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test I : The Body Control Module (BCM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test J : The GSM (Gearshift Module) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test K : The TRCM (Transmission Range Control Module) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test L : The FCIM (Front Controls Interface Module) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test M : The Audio Front Control Module (ACM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test N : The Image Processing Module A (IPMA) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test O : The Global Positioning System Module (GPSM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test P : The FCDIM (Front Control/Display Interface Module) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test Q : The Accessory Protocol Interface Module (APIM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test R : The DSP (Audio Digital Signal Processing Module) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test S : The Radio Transceiver Module (RTM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test T : The Power Steering Control Module (PSCM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test U : The Driver Seat Module (DSM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test V : The Driver Door Module (DDM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test W : The Passenger Door Module (PDM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test X : The Side Obstacle Detection Control Module LH (Sod-L) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test Y : The Side Obstacle Detection Control Module RH (Sod-R) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test Z : The Cruise Control Module (CCM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test Aa : The Head Up Display (HUD) Module Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test Ab : The HSWM (Heated Steering Wheel Module) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test Ac : The TELEMATIC Control Unit (TCU) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test Ad : The Battery Energy Control Module (BECM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test AE : The Secondary On-Board Diagnostic Control Module A (SOBDM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test AF : The ACCM (Air Conditioning Control Module) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test Ag : The Direct Current/Direct Current (Dc/Dc) Converter Control Module Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test Ah : The Generic Function Module (GFM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test Ai : The Gateway Module (GWM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test AJ : No High Speed Controller Area Network 1 (HS1-Can) Communication, All Modules Are Not Responding
- Pinpoint Test AK : No High Speed Controller Area Network 2 (HS2-Can) Communication, All Modules Are Not Responding
- Pinpoint Test Al : No High Speed Controller Area Network 3 (HS3-Can) Communication, All Modules Are Not Responding
- Pinpoint Test Am : No Medium Speed Controller Area Network (Ms-Can) Communication, All Modules Are Not Responding
- Pinpoint Test An : No Power To The Data Link Connector (DLC)
- Communications Network - 2.0L Duratec - Hybrid (96kW/130PS)
- General Procedures
- Removal And Installation