Brake Master Cylinder: Installation
- 2.
- If a new brake master cylinder has been installed, bleed the master cylinder. Refer to: Component Bleeding ).
- If the brake master cylinder was removed to access other components, bleed the brake system. Refer to: Brake System Pressure Bleeding . Refer to: Brake System Pressure Bleeding - RS .
- 3.
If equipped with a manual transmission, bleed the clutch system. Refer to: Clutch System Bleeding - 5-Speed Manual Transmission - MTX75 . Refer to: Clutch System Bleeding - 6-Speed Manual Transmission - B6 . Refer to: Clutch System Bleeding - 6-Speed Manual Transmission - MMT6 .