Active Park Assist Switch: Removal

1.

NOTE: Automatic transmission shown, manual transmission similar.

Remove the selector lever trim ring. Use the General Equipment: Interior Trim Remover

GFD63482

Courtesy of FORD MOTOR COMPANY

2.

Remove the RH finish panel. Use the General Equipment: Interior Trim Remover

GFD63483

Courtesy of FORD MOTOR COMPANY

3.

Remove the instrument panel center finish panel. Use the General Equipment: Interior Trim Remover

GFD63484

Courtesy of FORD MOTOR COMPANY

4.

Release the clips and remove the floor console upper finish panel. Use the General Equipment: Interior Trim Remover

GFD63485

Courtesy of FORD MOTOR COMPANY

5.

Remove the screws, release the clips and remove the floor console upper trim panel.
- Disconnect the electrical connectors.
  Torque: 18 lb.in (2 Nm)

GFD63486

Courtesy of FORD MOTOR COMPANY

6.

Remove the screws and the active park assist switch.

GFD63487

Courtesy of FORD MOTOR COMPANY