Power Transfer Unit

• 1.
  
  Refer to: Battery Tray .

• 2.
  
  Drain the cooling system. Refer to: Cooling System Draining, Vacuum Filling and Bleeding .

• 3.
  
  

Courtesy of FORD MOTOR COMPANY

• 4.
  
  

Courtesy of FORD MOTOR COMPANY

• 5.
  
  Refer to: Wheel and Tire .

• 6.
  
  

Courtesy of FORD MOTOR COMPANY

• 7.
  
  On both sides.

Courtesy of FORD MOTOR COMPANY

• 8.
  
  

Courtesy of FORD MOTOR COMPANY

• 9.
  
  

Courtesy of FORD MOTOR COMPANY

• 10.
  
  
  NOTE: Whenever the turbocharger air intake system components are removed, always cover the open ports.

Courtesy of FORD MOTOR COMPANY

• 11.
  
  Refer to: Front Halfshaft RH - 2.3L EcoBoost (257kW/350PS) - MI4 .

• 12.
  
  

Courtesy of FORD MOTOR COMPANY

• 13.
  
  Refer to: Roll Restrictor RH - 2.3L EcoBoost (257kW/350PS) - MI4 .

• 14.
  
  

Courtesy of FORD MOTOR COMPANY

• 15.
  
  
  NOTE: Note the position of the component before removal.

  Torque: 26 lb.ft (35 Nm)

Courtesy of FORD MOTOR COMPANY

• 16.
  
  Fabricate a tool

Courtesy of FORD MOTOR COMPANY

• 17.
  
  

Courtesy of FORD MOTOR COMPANY

• 18.
  
  
  NOTE: Be prepared to collect escaping fluid.

Courtesy of FORD MOTOR COMPANY

• 19.
  
  After remove retainer position shield off to the side.

Courtesy of FORD MOTOR COMPANY

• 20.
  
  

Courtesy of FORD MOTOR COMPANY

• 21.
  
  

Courtesy of FORD MOTOR COMPANY

• 22.
  
  

Courtesy of FORD MOTOR COMPANY