Brake Vacuum Pump - 2.0L EcoBoost (184kW/250PS) - MI4: Removal

NOTE: Removal steps in this procedure may contain installation details.

• 1.
  
  Remove the air cleaner outlet pipe. Refer to: Air Cleaner Outlet Pipe .

• 2.
  
  Squeeze the sides of the coupling and disconnect the vacuum tube.

Courtesy of FORD MOTOR COMPANY

• 3.
  
  Remove the bolts and the brake vacuum pump.

  Torque: 89 lb.in (10 Nm)

Courtesy of FORD MOTOR COMPANY

• 4.
  
  Inspect the gasket and install a new gasket as necessary.

Courtesy of FORD MOTOR COMPANY