Rear Brake Flexible Hose: Removal
NOTE:
Do not spill brake fluid on painted or plastic surfaces or damage to the surface may occur. If brake fluid is spilled onto a painted or plastic surface, immediately wash the surface with water.
NOTE:
Removal steps in this procedure may contain installation details.
- 1.WARNING: Before beginning any service procedure, refer to Safety Warnings in General Information. Failure to follow this instruction may result in serious personal injury.
Refer to: Health and Safety Precautions .
- 2.
With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting - Overview .
- 3.
- 1.
Disconnect the brake tube fitting and detach the brake hose.Torque: 133 lb.in (15 Nm)
- 2.
Remove the bolt and position aside the brake flexible hose.Torque: 106 lb.in (12 Nm)
- 1.