LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2017 >> Fiesta Titanium, 4D Hatchback, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Engine Cooling System - 1.6L ECOBOOST (132KW/180PS) - Sigma) >> Removal And Installation >> Heater Hoses >> Installation

Heater Hoses: Installation

WARNING: This page is about a different variant/trim than selected.

  1. 1.

    To install, reverse the removal procedure.

  1. 2.

    Fill and bleed the cooling system. Refer to: Cooling System Draining, Vacuum Filling and Bleeding .
scientia non olet · About LEMON Manuals