LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2017 >> Fiesta Titanium, 4D Hatchback, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Electronic Engine Controls System - 1.6L ECOBOOST (132KW/180PS) - Sigma) >> Removal And Installation >> Fuel Rail Pressure (FRP) Sensor >> Installation

Fuel Rail Pressure (FRP) Sensor: Installation

WARNING: This page is about a different variant/trim than selected.

  1. 1.

    • Install and tighten the FRP sensor.

      Torque: 24 lb.ft (32.5 Nm)

GFD140023Courtesy of FORD MOTOR COMPANY

  1. 2.

    Connect the FRP sensor electrical connector.
GFD140022Courtesy of FORD MOTOR COMPANY

  1. 3.

    Install engine appearance cover.
GFD139331Courtesy of FORD MOTOR COMPANY

  1. 4.

    Refer to: Battery Disconnect and Connect .
scientia non olet · About LEMON Manuals