Camshaft Seal: Installation
WARNING: This page is about a different variant/trim than selected.
- 1.
Coat the camshaft bearing journal and the sealing lip of the camshaft oil seal with clean engine oil. Use Special Service Tool: 303-1532 Installer, Camshaft Seal.Material: Motorcraft ® SAE 5W-20 Synthetic Blend Motor Oil / XO-5W20-QSP (WSS-M2C945-A)
- 2.
Install the VCT unit. Refer to: Variable Camshaft Timing (VCT) Unit .