Safety Belt Warning Chime
The safety belt warning chime warns that the safety belt is not fastened. The safety belt warning chime sounds for approximately 6 seconds when the driver safety belt is not fastened and the ignition is transitioned from OFF or accessory to ON or START. The safety belt warning chime is turned off when the safety belt is fastened, when the ignition is transitioned from ON or START to OFF or accessory, or after approximately 6 seconds. The IPC receives the safety belt warning chime request from the RCM over the HS-CAN.
When a programmed MyKey ® is in use, the audio system is muted when the Belt-Minder ® is active.