Exterior Mirror Motor Synchronization - Power Folding

NOTE: The power folding mirrors must be synchronized anytime the mirrors are folded or unfolded without using the exterior mirror control switch, or if a new power folding mirror is installed.

NOTE: If the power folding mirrors are electronically folded or unfolded continuously (6 to 10 cycles), the power lockout feature will disable the system for 7-10 minutes to prevent damage to the power fold motors. After 7-10 minutes have elapsed, normal operation will resume.

1.

NOTE: For vehicles equipped with the mirror control switch integral to the window switch,
multimedia:A supplement to the article is available.

For the stand alone switch
multimedia:A supplement to the article is available.

Fold the mirrors back on each side so they are parallel with the side windows.

2.

Position the exterior mirror control switch to the CENTER position.

NOTE: It may be necessary to cycle the power folding mirrors in or out up to 4 times before they are synchronized.

3.

Press the exterior mirror control switch rearward to the FOLD/UNFOLD position and cycle the power folding mirrors in and out 4 times.

4.

When an audible popping sound is heard, the power folding mirror motors are synchronized.