LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2017 >> Expedition XL, RWD >> Repair and Diagnosis (Single Page) >> Electrical >> Gauges >> Information Center - Instrumentation, Message Center, And Warning Chimes >> Removal And Installation >> Instrument Panel Cluster (IPC) >> Installation

Instrument Panel Cluster (IPC): Installation

  1. 1.

    Position the IPC and install the 4 screws.
    • Connect the electrical connector.

  1. 2.

    Position the IPC finish panel and install the ambient air temperature sensor electrical connector and air tube.

  1. 3.

    Connect the dimmer switch electrical connector.

  1. 4.

    Install the IPC finish panel and the 2 screws.

  1. 5.

    Position the lower steering column cover and install the 3 screws.
    • Connect the electrical connector for the brake pedal switch (if equipped).

  1. 6.

    Using a diagnostic scan tool, complete the PMI process for the IPC following the on-screen instructions.
scientia non olet · About LEMON Manuals