Pinpoint Test Y : The Mil Is Never Or Always On: Notes
Normal Operation and Fault Conditions
See MIL. Refer to Instrument Panel Cluster (IPC) .
NOTE:
If DTC U0100:00 sets in the IPC, other observable symptoms can be an inoperative speedometer, tachometer or odometer.
If the engine MIL request message is missing or invalid for less than 5 seconds, the IPC defaults the MIL to its last state (on or off) based upon the last message received.
If the engine MIL request message is missing for 5 seconds or longer, the IPC sets DTC U0100:00 in continuous memory and defaults the MIL on.
Possible Sources
- PCM concern
- IPC