Pinpoint Test D : The Speedometer Is Inoperative
- D1 PERFORM THE PCM KOEO SELF-TEST
- Ignition ON.
- Using a diagnostic scan tool, perform the PCM KOEO self-test.
Are any DTCs recorded?
Yes REFER to Electronic Engine Controls . No GO to D2. - D2 PERFORM THE IPC SELF-TEST
- Using a diagnostic scan tool, perform the IPC self-test.
Are any DTCs recorded?
Yes REFER to DTC Chart: IPC . No GO to D3. - D3 PERFORM THE SPEEDOMETER ACTIVE COMMAND USING THE SCAN TOOL
- Using a diagnostic scan tool, view the IPC PIDs.
- Select the IPC speedometer (SPDOMETER) PID. Command the speedometer on and off while monitoring the speedometer.
Does the speed begin at 0 km/h (0 mph) move to 193 km/h (120 mph) and return to 0 km/h (0 mph)?
Yes DIAGNOSE all PCM DTCs. REFER to Electronic Engine Controls . No