Symptom Chart: Autolamps
Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. Refer to Service Information for information regarding Ford-specific diagnostic practices.
Symptom Chart: Autolamps
| Condition | Possible Sources | Actions |
|---|---|---|
| A module does not respond to the scan tool | Fuse Wiring, terminals or connectors Module |
REFER to Module Communications Network . |
| The autolamps are inoperative | Autolamp/sunload sensor BCM. |
GO to Pinpoint Test A . |
| The autolamps are on continuously | Wiring, terminals or connectors Autolamp/sunload sensor BCM. |
GO to Pinpoint Test B . |