Pinpoint Test G : DTC B1B36:96, B1B38:96, B1B40:96 Or B1B42:96: Notes
Refer to Parking Aid , for schematic and connector information.
Normal Operation and Fault Conditions
The attenuation time for the front parking aid sensors is the time required for a sensor to detect the distance to an object expressed in milliseconds (ms). If the parking aid sensor signal or the attenuation time is out of normal range, the PAM stores a corresponding DTC and disables the front parking aid system.
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B1B36:96 | Right Front Outer Sensor: Component Internal Failure | A continuous and on-demand DTC that sets when the right front outer parking aid sensor has internally failed or has an incorrect attenuation time. |
| B1B38:96 | Right Front Inner Sensor: Component Internal Failure | A continuous and on-demand DTC that sets when the right front inner parking aid sensor has internally failed or has an incorrect attenuation time. |
| B1B40:96 | Left Front Outer Sensor: Component Internal Failure | A continuous and on-demand DTC that sets when the left front outer parking aid sensor has internally failed or has an incorrect attenuation time. |
| B1B42:96 | Left Front Inner Sensor: Component Internal Failure | A continuous and on-demand DTC that sets when the left front inner parking aid sensor has internally failed or has an incorrect attenuation time. |
Possible Sources
- Parking aid sensor
- PAM