Pinpoint Test E : DTC B1B36:14, B1B38:14, B1B40:14 Or B1B42:14: Notes
Refer to Parking Aid , for schematic and connector information.
Normal Operation and Fault Conditions
When the ignition is on, the PAM continuously supplies voltage and ground to the parking aid sensors while monitoring a signal circuit for each sensor. If a return signal is not detected from one or more of the front parking aid sensors, the PAM stores a corresponding DTC and disables the front parking aid system.
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B1B36:14 | Right Front Outer Sensor: Circuit Short To Ground Or Open | A continuous and on-demand DTC that sets when any of the right front outer parking aid sensor circuits are open or the sensor signal line is shorted to ground. |
| B1B38:14 | Right Front Inner Sensor: Circuit Short To Ground Or Open | A continuous and on-demand DTC that sets when any of the right front inner parking aid sensor circuits are open or the sensor signal line is shorted to ground. |
| B1B40:14 | Left Front Outer Sensor: Circuit Short To Ground Or Open | A continuous and on-demand DTC that sets when any of the left front outer parking aid sensor circuits are open or the sensor signal line is shorted to ground. |
| B1B42:14 | Left Front Inner Sensor: Circuit Short To Ground Or Open | A continuous and on-demand DTC that sets when any of the left front inner parking aid sensor circuits are open or the sensor signal line is shorted to ground. |
Possible Sources
- Wiring, terminals or connectors
- Parking aid sensor
- PAM