Pinpoint Test B : DTC B1B44:14, B1B46:14, B1B48:14 Or B1B50:14: Notes
Refer to Parking Aid , for schematic and connector information.
Normal Operation and Fault Conditions
When the ignition is on, the PAM continuously supplies voltage and ground to the parking aid sensors while monitoring a signal circuit for each sensor. If a return signal is not detected from one or more of the parking aid sensors, the PAM stores a corresponding DTC and disables the rear parking aid system.
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B1B44:14 | Right Rear Outer Sensor: Circuit Short To Ground Or Open | A continuous and on-demand DTC that sets when any of the right rear outer parking aid sensor circuits are open or the sensor signal line is shorted to ground. |
| B1B46:14 | Right Rear Inner Sensor: Circuit Short To Ground Or Open | A continuous and on-demand DTC that sets when any of the right rear inner parking aid sensor circuits are open or the sensor signal line is shorted to ground. |
| B1B48:14 | Left Rear Outer Sensor: Circuit Short To Ground Or Open | A continuous and on-demand DTC that sets when any of the left rear outer parking aid sensor circuits are open or the sensor signal line is shorted to ground. |
| B1B50:14 | Left Rear Inner Sensor: Circuit Short To Ground Or Open | A continuous and on-demand DTC that sets when any of the left rear inner parking aid sensor circuits are open or the sensor signal line is shorted to ground. |
Possible Sources
- Wiring, terminals or connectors
- Parking aid sensor
- PAM