The Cd Slot Illumination Is Inoperative (With 8-Inch [203 Mm] Touchscreen Only)
Refer to Wiring Diagrams Cell for schematic and connector information.
Normal Operation and Fault Conditions
The FCIM supplies a pulse-width modulated voltage to the CD slot illumination. The CD slot illumination is inactive when a CD is in the CD player.
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B13DC:11 | Compact Disc Slot Illumination: Circuit Short to Ground | Sets in continuous memory when the FCIM detects a short to ground on the CD slot illumination output circuit. |
| B13DC:12 | Compact Disc Slot Illumination: Circuit Short to Battery | Sets in continuous memory when the FCIM detects a short to battery on the CD slot illumination output circuit. |
| B13DC:13 | Compact Disc Slot Illumination: Circuit Open | Sets in continuous memory when the FCIM detects an open on the CD slot illumination output circuit. |
Possible Sources
- Wiring, terminals or connectors
- Upper center instrument panel finish panel
- FCIM