LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2017 >> C-Max Hybrid Titanium >> Repair and Diagnosis (Single Page) >> Engine Performance >> Fuel Delivery >> Fuel Tank And Lines - 2.0L DURATEC - Hybrid (96KW/130PS) >> Removal And Installation >> Fuel Tank >> Removal

Fuel Tank: Removal

WARNING: Before beginning any service procedure in this section, refer to Safety Warnings in section 100-00 General Information. Failure to follow this instruction may result in serious personal injury.
  1. Refer to: Gasoline And Gasoline-Ethanol Fuel Systems Health and Safety Precautions .
  2. With the vehicle in NEUTRAL, position it on a hoist. REFER to: Jacking And Lifting - Overview .
  3. Release the fuel system pressure. REFER to: Fuel System Pressure Release .
  4. Drain the fuel tank. REFER to: Fuel Tank Draining .
  5. GFD222960Courtesy of FORD MOTOR COMPANY
  6. GFD223952Courtesy of FORD MOTOR COMPANY
  7. GFD223922Courtesy of FORD MOTOR COMPANY
  8. Torque: 18 lb.ft (25 Nm)
    GFD223923Courtesy of FORD MOTOR COMPANY
  9. Torque: 35 lb.ft (48 Nm)
    GFD223953Courtesy of FORD MOTOR COMPANY
  10. GFD223954Courtesy of FORD MOTOR COMPANY
  11. GFD223955Courtesy of FORD MOTOR COMPANY
  12. GFD223956Courtesy of FORD MOTOR COMPANY
  13. Use the General Equipment: Powertrain Jack

    Torque: 18 lb.ft (25 Nm)

    GFD223957Courtesy of FORD MOTOR COMPANY
  14. GFD223958Courtesy of FORD MOTOR COMPANY