LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2017 >> C-Max Hybrid Titanium >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Engine - 2.0L DURATEC - Hybrid (96KW/130PS) >> Removal And Installation >> Flywheel >> Removal

Removal And Installation: Flywheel: Removal

  1. NOTE: If the engine is being removed to access the flywheel, it is not necessary to drain the engine oil or remove the oil filter.
  2. Remove the bolts and the damper.
    GFD223286Courtesy of FORD MOTOR COMPANY
  3. Remove the bolts and the flywheel.
    • Discard the bolts.
    GFD223287Courtesy of FORD MOTOR COMPANY