LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2017 >> C-Max Hybrid Titanium >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System - 2.0L DURATEC - Hybrid (96KW/130PS) >> Removal And Installation >> Thermostat >> Removal

Removal And Installation: Thermostat: Removal

NOTE: Removal steps in this procedure may contain installation details.
  1. WARNING: Before beginning any service procedure, refer to Safety Warnings in General Information. Failure to follow this instruction may result in serious personal injury.

    Refer to: Engine Cooling System Health and Safety Precautions .

  2. Refer to: Cooling System Draining, Filling and Bleeding .
  3. NOTE: Be prepared to contain escaping fluid.

    Torque: 89 lb.in (10 Nm)

    GFD223554Courtesy of FORD MOTOR COMPANY
  4. Discard the specified component. Follow local disposal regulations.
    GFD223555Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals