Network Message Chart - Gauges
Module Network Input Messages - IPC
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Accessory power usage data | SOBDMC | Input used for the accessory power gauge. |
| Battery power level display | SOBDMC | Input used to display the split power gauge. |
| Battery state of charge data | BECM | Input used for the high voltage battery gauge and for the debt-surplus gauge. |
| Brake event data | SOBDMC | Input used for the brake coach gauge. |
| Charge/discharge indication | SOBDMC | Input used for the brake coach gauge. |
| Climate control power usage data | SOBDMC | Input used for the accessory power gauge. |
| Driver requested power | SOBDMC | Input used for the integrated power gauge. |
| GPS enhanced electric vehicle mode | SOBDMC | Input used for the integrated power gauge. |
| Engine active status | SOBDMC | Input used for the integrated power and split power gauges. |
| Engine power level data | SOBDMC | Input used for the split power gauge. |
| Engine rpm data | PCM | Input used for the tachometer and the fuel gauge. |
| Fuel level data | BCM | Input used to control the fuel gauge. |
| Gear lever position | PCM | Input used to control the fuel gauge. |
| Hybrid mode status display | SOBDMC | Input used for the brake coach gauge. |
| Ignition status | BCM | Ignition RUN, START and ACC states required for the IPC operating modes and fault reporting. |
| Odometer count | ABS module | Input used for the debt-surplus gauge. |
| Regen active display | SOBDMC | Input used for the high voltage battery gauge. |
| Regen event level data | SOBDMC | Input used for the brake coach gauge. |
| Threshold power level | SOBDMC | Input used for the integrated power gauge. |
| Threshold power display on/off request | SOBDMC | Input used for the integrated power gauge. |
| Vehicle speed | ABS module | Input used for speedometer and fuel gauge indication. |