Pinpoint Tests: B10D7:05
Normal Operation and Fault Conditions
When the BCM enters a key programming state, it activates the transceiver to read the key in the ignition lock cylinder. If a valid PATS key is used and there are no concerns with PATS, the key is programmed into the BCM memory.
REFER to: Passive Anti-Theft System (PATS) - System Operation and Component Description .
BCM DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B10D7:05 | PATS Key: System Programming Failure | Sets when a PATS key is not successfully programmed into the BCM. |
Possible Sources
- PATS key not programmed
Visual Inspection and Diagnostic Pre-checks
- Inspect the PATS key for damage.
- Verify the correct key is used.