Pinpoint Test Ai : A Transmission Malfunction Display Is Never Or Always On

AI1 CHECK THE MESSAGE CENTER OPERATION
- Ignition ON.
- Close all doors and the liftgate (if equipped).
- Clear all message center warnings by pressing the OK button for each warning present.
- NOTE: If multiple warnings are present, the message center cycles through each of the warning indicators. Allow the message center to cycle through each display while determining whether the door ajar message center warning is active.
  
  Monitor the door ajar message center warning.
- Open the driver door.
- Clear the message center popup warning.
- Monitor the door ajar message center warning.
Does the driver door ajar message center warning turn off with the driver door closed and turn on with the driver door open?

Yes GO to AI2

No Refer to IPC Hardware Testing .

AI2 RETRIEVE THE RECORDED DIAGNOSTIC TROUBLE CODES (DTCS) FROM THE IPC (INSTRUMENT PANEL CLUSTER) SELF-TEST
- Using a diagnostic scan tool, perform the IPC self-test.
Are any DTC recorded?

Yes REFER to DTC Chart: IPC .

No GO to AI3

AI3 RETRIEVE THE RECORDED DTCS FROM THE BCM (BODY CONTROL MODULE) SELF-TEST

Using a diagnostic scan tool, perform the BCM self-test.

Are any DTCs recorded?

Yes	REFER to: Body Control Module (BCM) .

No	DIAGNOSE any transmission related Diagnostic Trouble Codes (DTCs). Refer to: Automatic Transmission - 1.6L EcoBoost (132kW/180PS) - Sigma . Refer to: Automatic Transmission - 2.5L Duratec (125kW/170PS) .