LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2016 >> Fusion Titanium, AWD >> Repair and Diagnosis (Single Page) >> Electrical >> Gauges >> Information Center - Instrumentation, Message Center And Warning Chimes (Except Hybrid) >> Description And Operation >> Instrument Panel Cluster (IPC) - System Operation and Component Description >> Network Message Chart - Indicators

Network Message Chart - Indicators

Module Network Input Messages - IPC 

Broadcast Message Originating Module Message Purpose
ABS warning indicator request ABS module Input used to control the ABS warning indicator.
Air bag warning indicator request RCM Input used to control the air bag warning indicator.
AWD service required PCM Input used to control the powertrain malfunction (wrench) indicator
Body service required BCM Input used to control the powertrain malfunction (wrench) indicator
Brake warning indicator request ABS module Input from the ABS for the parking brake input used to control the brake warning indicator.
Brake (red) warning indicator request ABS module Input from the ABS used to control the brake warning indicator.
Charging system indication request BCM Input used to control the charging system warning indicator.
Door ajar status BCM Input used to control the door ajar warning indicator.
Driver safety belt buckle status RCM Input used to control the safety belt warning indicator.
Engine rpm data PCM Input used to control the low oil pressure warning indicator.
Engine service required PCM Input used to control the powertrain malfunction (wrench) indicator
Fog lamp indicator request BCM Input used to control the fog lamp indicator.
High beam status BCM Input used to control the high beam indicator.
Ignition status BCM Ignition RUN, START and accessory states required for the IPC operating modes and fault reporting.
MIL request PCM Input used to control the MIL.
Oil pressure warning indicator request PCM Input used to control the low oil pressure warning indicator.
Parking brake warning indicator request ABS module Input used to control the parking brake indicator.
Parklamp status BCM Input used to control the lights on indicator.
Red brake warning indicator request BCM Input for the brake fluid level status used to control the brake warning indicator.
Stability-traction control indicator request ABS module Input used to control the stability/traction control (sliding car icon) indicator.
Stability-traction control disabled indicator request ABS module Input used to control the stability/traction control disabled (sliding car OFF icon) indicator.
Stop/start indicator request PCM Input used to control the auto stop/start indicator.
Tire pressure warning indicator BCM Input used to control the TPMS indicator.
Transmission gear display actual PCM Input used to display or flash the PRNDL indication.
Transmission service required PCM Input used to control the powertrain malfunction (wrench) indicator
Transmission shift mode display PCM Input used to control the select shift segment of the PRNDL indication.
Turn indication status BCM Input used to control the RH turn, LH turn and hazard indicators.