Auto Stop/Start Indicator

The auto stop/start indicator informs the driver of the following states:

• Solid green-the auto stop/start feature has temporarily turned off the motor.
• Solid amber-a stop/start system concern exists.
• Flash in either green or amber-system state as determined by the PCM.
• Grayed out (mid-level IPC) indicates the auto stop/start feature is not available.

The IPC receives the stop/start indicator request from the GWM over the High Speed Controller Area Network 3 (HS3-CAN). The GWM receives the auto stop/start indicator request from the PCM over the High Speed Controller Area Network 1 (HS1-CAN).