Pinpoint Test C : B129C:96, B129D:96: Notes
Normal Operation and Fault Conditions
The Parking Aid Module (PAM) continuously monitors the front active park assist sensor signals any time the ignition is on.
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B129C:96 | Left Front Side Sensor: Component Internal Failure | A continuous and on-demand DTC that sets when the left front active park assist sensor has internally failed or has an incorrect attenuation time. |
| B129D:96 | Right Front Side Sensor: Component Internal Failure | A continuous and on-demand DTC that sets when the right front active park assist sensor has internally failed or has an incorrect attenuation time. |
Possible Sources
- Front active park assist sensor
- Parking Aid Module (PAM) (integral to the BCM)
Visual Inspection and Diagnostic Pre-Checks
Before disconnecting the Parking Aid Module (PAM) or any of the active park assist sensors, verify the connectors are properly seated and latched.