Pinpoint Test A : B129C:12, B129D:12: Notes
Refer to Audio System/Navigation - Fusion With Touchscreen/Without Sony for schematic and connector information.
Normal Operation and Fault Conditions
The Parking Aid Module (PAM) continuously monitors the front active park assist sensor signals any time the ignition is on.
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B129C:12 | Left Front Side Sensor: Circuit Short To Battery | A continuous and on-demand DTC that sets when the left front active park assist sensor signal circuit is shorted to battery voltage. |
| B129D:12 | Right Front Side Sensor: Circuit Short To Battery | A continuous and on-demand DTC that sets when the right front active park assist sensor signal circuit is shorted to battery voltage. |
Possible Sources
- Wiring, terminals or connectors
- Front active park assist sensor
- Parking Aid Module (PAM) (integral to the BCM)
Visual Inspection and Diagnostic Pre-Checks
Before disconnecting the Parking Aid Module (PAM) or any of the active park assist sensors, verify the connectors are properly seated and latched.