Pinpoint Test I : B1B36:96, B1B38:96, B1B40:96, B1B42:96: Notes
Refer to Audio System/Navigation - Fusion With Touchscreen/Without Sony for schematic and connector information.
Normal Operation and Fault Conditions
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B1B36:96 | Right Front Outer Sensor: Component Internal Failure | A continuous and on-demand DTC that sets when the right front outer parking aid sensor has internally failed or has an incorrect attenuation time. |
| B1B38:96 | Right Front Inner Sensor: Component Internal Failure | A continuous and on-demand DTC that sets when the right front inner parking aid sensor has internally failed or has an incorrect attenuation time. |
| B1B40:96 | Left Front Outer Sensor: Component Internal Failure | A continuous and on-demand DTC that sets when the left front outer parking aid sensor has internally failed or has an incorrect attenuation time. |
| B1B42:96 | Left Front Inner Sensor: Component Internal Failure | A continuous and on-demand DTC that sets when the left front inner parking aid sensor has internally failed or has an incorrect attenuation time. |
Possible Sources
- Wiring, terminals or connectors
- Front parking aid sensor
- Parking Aid Module (PAM) (integral to the BCM)
NOTE:
Before disconnecting the Parking Aid Module (PAM) or any of the parking aid sensors, verify the connectors are properly seated and latched.